Ajantha College and School Students Science Projects materials The Great in project

"In the name of Allah, most
Gracious, most Compassionate"

Phone

044 4213 1795

Mobile

+91 91764 16648
 

HOT POT SENSORS

Offering you a complete choice of products which include HOT POT SENSORS such as Industrial Motion & Position Sensors HotPot 50mm, Industrial Motion & Position Sensors HotPot 0100mm and Sensor Hotpot 10k Ohm 25mm.

HOT POT SENSORS

Industrial Motion & Position Sensors HotPot 50mm

industrial-motion-position-sensors-hotpot-50mm-250x250
Features:
High Life Cycle
High Temperature Capability
Linear Position Sensor
IP65 Dust Proof, water proof,
Fibreglass substrate
3M pressure Sensitive Adhesive(PSA)
Upon request
-Male or Female nicomatic connectors
-wiper of 1-3 newton force to actual part
-contactless option available

Mechanical Specifications:
Life cycle> 10 million
height<=0.51mm

Electrical Specification:
Resistance Standard: 10 k ohms
Resistance custom- 5 k to 100 k ohms
Effective electrical Travel: 10 to 1200 mm
Power rating: 1 watt max
Resolution: Analog output theriotically infinite
Dielectric value: No affect @500 VAC for 1 minute


How it works:
In simple terms, the HotPot membrane potentiometer is a resistive element, which comprises a conductive resistor, a sealed encasement and a simple wiper assembly. A membrane potentiometer can also function as a voltage divider.
The HotPot is a three-wire system with two resistive output channels and an electrical collector channel

Industrial Motion & Position Sensors HotPot 0100mm

industrial-motion-position-sensors-hotpot-1000mm-250x250
Features:

High Life Cycle
- High Temperature Capability
- Linear Position Sensor
- IP65 Dust Proof, Water Proof (Intense Spray)
- Fiberglass Substrate
- 3M Pressure Sensitive Adhesive (PSA)
- Upon Request
   - Male or Female Nicomatic Connectors
   - Wiper of 1-3 Newton Force to Actuate
     Part
   - Contactless Options Available


Mechanical Specification:

Life Cycle: >10 million
-Height:   0.51mm (0.020")
-Actuation Force (with a 10mm wide active cavity):
                     -40°C 3.0 to 5.0 N
                     -25°C 2.0 to 5.0 N
                    +23°C 0.8 to 2.0 N
                    +85°C 0.7 to 1.8 N

Electrical Specifications:

Resistance - Standard: 10k Ohms
   (lengths >300mm = 20k Ohms)
-Resistance - Custom: 5k to 100k Ohms
-Resistance Tolerance: ±20%
-Effective Electrical Travel: 10 to 1200mm
-Linearity (Independent): Linear ±1% or ±3%
                                        Rotary ±3% or ±5%
-Repeatability: No hysteresis, but with any wiper
    looseness some hysteresis will occur
-Power Rating (depending on size, varies with
    length and temperature): 1 Watt max. @ 25°C,
      0.5 Watt recommended
-Resolution: Analog output theoretically infinite;
    affected by variation of contact wiper surface
    area.
-Dielectric Value: No affect @ 500VAC for 1
   minute

How it works:

In simple terms, the HotPot membrane potentiometer is a resistive element, which comprises a conductive resistor, a sealed encasement and a simple wiper assembly.  A membrane potentiometer can also function as a voltage divider. The HotPot is a three-wire system with two resistive output channels and an electrical collector channel.

Minimum Force: 1 Newton
-Maximum Force: 3 Newtons
-Tip Material: Delrin
-Thread Pitch: M1.0 (1mm)

Sensor Hotpot 10k Ohm 25mm

sensor-hotpot-10k-ohm-25mm-250x250
Features:
High Life cycle
High temperature Capability
Linear position sensor
IP65 Dust Proof,(intense spray)
Fibreglass substrate
3M Pressure sensitive adhesive(PSA)
Upon Request
-Male or Female Nicomatic Connectors
-Wiper of 1-3 Newton Force to actuate part
-Contactless part available

Mechanical Speciications:
Life Cycle >10 million
Height<=0.51mm

Electrical Specification:
Resistance Standard: 10 K ohm
Resistance Custom 5 K to 100 k ohm
Effective Electrical travel: 10 to 1200 mm
power rating: 1 watt max
Resolution: Analog output theritically infinite
affected by variation of contact wiper surface area
Dielectric Value: No affect @500VAC for 1 minute


How it works:
In simple terms, the HotPot membrane potentiometer is a resistive element, which comprises a conductive resistor, a sealed encasement and a simple wiper assembly. A membrane potentiometer can also function as a voltage divider.The HotPot is a three-wire system with two resistive output channels and an electrical collector channel.